5pcs HC-06 HC06 Wireless Bluetooth Module with Slave Base

【HC-06】 The central module uses HC-06, the interface cables of the module include VCC, GND, TXD, RXD, LED status output output pin, the microcontroller can be judged by the status of the foot. Bluetooth has connected the invalid KEY Pin slave. 【Easy operation】 The LED indicates the Bluetooth connection status, the Bluetooth connectivity flashing, turned on the Bluetooth connection and opened a port. Backplane.3.3V Input voltage LDO 3.6 ~ 6V, the current is approximately 30mA unpaired, paired approximately 10mA, the input voltage to prohibit more than 7V! The 3.3V interface level, can be directly connected to several SCM (51, AVR, PIC, ARM, MSP430, etc.), the 5V MCU can also be connected directly, without MAX232 can not go through the 【Compact design】 Open to the effective distance of 10 meters, more than 10 meters is also possible, but not of this, the quality of the connection of the distance guarantees.After torque, when using the full duplex serial port, no you need to know nothing about the Bluetooth protocol, it only supports 8 data bits, 1 stop bit, no parity communication format, which is the most used communication format is not compatible Other formats .Compact (3.57cm * 1.52cm), Factory chip production to guarantee 【COMPATABILITY】 The AT command does not establish compatibility with the Bluetooth connection. The transmission speed, name, password and set parameters are saved afterwards. The Bluetooth connection is automatically switched to transfer mode. The link from the machine, the computer, Bluetooth with Bluetooth works from the function with a variety of hosts, most with a cell phone with Bluetooth capability, PDA, PSP and other intelligent terminals pairing from no pairing between the machine. 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT