Integra drx5.4bmma

Integra DRX - 3.4 Welcome Extraordinary into Your Home Theater-reference Dolby Atmos® or DTS:X® sound through up to 7.2.4 channels* complements 8K HDR video passthrough. Connect 5.2.4-ch speakers and Zone 2 speakers and switch between 5.2.4-ch and 5.2.2-ch + Zone 2 playback, or use 5 GHz/2.4 GHz Wi-Fi® and your voice to control music all around your home. Audio & Video Highlights 5.2.4/7.2.2-ch Dolby Atmos® and DTS:X® playback Dolby Atmos Height Virtualization Dolby Surround® and DTS® Neural:X upmixing HDMI®*1 supports 8K/60p (4:4:4/12-bit*2, 4:2:2/12-bit*2, 4:2:0/10-bit*3), 8K/30p (4:4:4/12-bit*2, 4:4:4/10-bit*3, 4:2:2/12-bit*3, 4:2:0/12-bit), 4K/120p (4:4:4/12-bit*2, 4:4:4/10-bit*3, 4:2:2/12-bit*3, 4:2:0/12-bit) video passthrough, HDR10+, Dolby VisionTM, HDR10, HLG, BT.2020, VRR (Variable Refresh Rate), DSC (Display Stream Compression), ALLM (Auto Low Latency Mode), QFT (Quick Frame Transport), QMS (Quick Media Switching), eARC (enhanced Audio Return Channel), DeepColorTM, x.v.ColorTM, LipSync, and HDCP 2.3 11.2-ch pre-outs*4 and processing for 7.2.4-ch*5 layouts HDMI Main Out with eARC for encoded HQ audio, Sub/Zone 2 Out with OSD*6 Bidirectional Bluetooth® wireless technology Version 4.2 + LE (A2DP v1.2, AVRCP v1.3; RX: SBC/AAC, TX: SBC/Qualcomm® aptXTM/apt X HD) Separate Zone 2 speaker outputs enable 5.2.4-ch + Zone 2 speaker connection, 5.2.4-ch playback switching to 5.2.2-ch + Zone 2 playback Dedicated DACs support synced/independent D/A audio distribution in Zone 2 and Zone 3 (including HDMI/SPDIF/NET*8) via Zone 2 and Zone 3 speaker outputs, Zone 2 pre-out*9 and Zone 3 pre-out Share any MAIN audio source to a wireless headphone dock via Zone B line-out Phono equalizer (MM) and SACD (Super Audio CD) playback via HDMI (2.8 MHz 2-ch/multichannel) irac Live® Room Correction supports multi-point acoustic calibration AccuReflexTM phase-matching solution for Dolby Atmos enabled speakers Original DSP-based Vocal Enhancer clarifies in-program vocals/dialog Amplification Technology 120 W per channel (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2-ch driven, FTC) THX® Certified Select for Theater Reference Sound IMAX® Enhanced certified for IMAX® digital remasters Low-impedance amp system with 4-ohm speaker-driving capability Massive custom transformer and customized 15,000 μF capacitors Copper bus-bar connects capacitors to amplifiers Non-phase-shift amp-circuit topology, audio-grade parts, and separate digital/analog circuit boards Extruded anti-resonant aluminum heat-sink Precision DAC supports 192 kHz/24-bit multichannel D/A conversion VLSCTM (Vector Linear Shaping Circuitry) filtering technology (Front L/R) Front L/R speaker bi-amping capability in 5.2/7.2/5.2.2-ch configuration PLL (Phase-Locked Loop) jitter-cleaning circuitry for SPDIF digital audio Independent tone controls (bass/treble) for all channels Network Features and Multi-Zone Audio Isolated quad-core SoC board supports high-speed 802.11ac (2x2 MIMO*9) Wi-Fi® Amazon Music HD*11, Spotify®, TIDAL, TuneIn, Pandora®, and Deezer*10 Works with Sonos supporting multiple Sonos Connect/Port control and Volume Passthrough mode Works with Alexa supporting multi-room music Works with Hey Google*14 and Chromecast built-inTM AirPlay 2 multi-room audio with Siri voice control DTS Play-Fi ®*13 multi-room audio via Integra Music Control App * Compatible with the Integra Remote app for iPad ®, iPhone ®, and Android Roon Tested certified for the Roon Core Hi-Res Audio via network (DSD 11.2 MHz/5.6 MHz/2.8 MHz*15, FLAC, WAV [RIFF], ALAC, and AIFF to 192 kHz/24-bit Audio-Video Connections 7 HDMI inputs (1 front), Main Out (eARC), Sub/Zone 2 Out 2 digital audio inputs (rear, 1 optical, 1 gold-plated coaxial, assignable) 6 gold-plated analog audio inputs (rear, assignable) Gold-plated phono input and built-in equalizer (MM) for turntable connection USB input (5 V/1 A) for audio playback (rear) 1/8 ̋ (3.5 mm) Dirac Live/AccuEQ Advance setup mic input (front) 2 gold-plated composite video inputs (rear, assignable) 1 gold-plated component video input (rear, assignable) 1/4 ̋ (6.3 mm) gold-plated headphone jack 11 gold-plated banana-plug-ready speaker posts with transparent knobs (including Zone 2) • Dedicated gold-plated Zone 2 speaker outputs*7 Gold-plated 11.2-ch pre-outs Gold-plated Zone 2 pre-out / Zone B line-out (analog RCA*8) Ethernet LAN terminal Custom Integration Features 10BASE-T/100BASE-TX Ethernet supports setup and IP control via web browser Works with Crestron®, Control4®, Savant, URC, ELAN, and RTI automation RS-232 input for external control and automation 2 IR inputs and 1 output 3 programmable 12 V trigger-outs with adjustable delay (A: 100 mA, B: 25 mA, C: 25 mA) Dealer-settings memory storage and recall function AC inlet for detachable IEC power cable Optional rack-mount kit (IRK-180-4C) Additional Features Aluminum front panel and volume knob Front-to-Surround/Height speaker switching in Stereo Assign Mode One-touch volume memory preset assignment to individual A/V inputs via front panel OSD function displays A/V input signal data, output signal/settings data, and network information Dolby® TrueHD and DTS-HD Master Audio® decoding Advanced Music OptimizerTM improves compressed audio playback quality High-definition GUI over HDMI Super Resolution 1080p to 4K and 1080p/4K to 8K video upscaling via HDMI Crossover Adjustment (40/45/50/55/60/70/80/90/100/110/120/130/150/180/200 Hz) A/V Sync Control (Up to 500 ms in 1 ms steps at 48 kHz*19) Sleep timer, HDMI passthrough, and network standby 40 FM/AM/internet radio presets with station-naming (10 characters) 3-Mode display dimmer (Normal/Dim/Dimmer) Specifications Amplifier Section Power Output Front L/ 250 W/Ch at 6 Ohms, 1 kHz, 10%, 1 Channel Driven, 120 W/Ch at 8 Ohms, 20 Hz-20 kHz, 0.08%, 2 Channels Driven, FTC Dynamic Powe 250 W (3 Ohms, Front) 220 W (4 Ohms, Front) 130 W (8 Ohms, Front) Input Sensitivity and Impedance 200 mV rms/47 k-Ohms (Line/Unbalance) 3.5 mV rms/47 k-Ohms (Phono MM) THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz-20 kHz, Half Power) Rated RCA Output Level and Impedance 1 V rms/470 Ohms (Subwoofer Pre-out) 200 mV rms/470 Ohms (Zone 3/Height 2/Pre-/Line-out) Phono Overload 70 mV (MM, 1 kHz, 0.5%) Frequency Response 10 Hz-100 kHz/+1 dB, -3 dB (Direct Mode) Tone Control ±10 dB, 20 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-Noise Ratio 106 dB (IHF-A, Line) 80 dB (IHF-A, Phono) Speaker Impedance: 4 Ohms-16 Ohms Video Section Signal Level 1 Vp-p/75 Ohms Composite Video 1 Vp-p/75 Ohms Component Video (Y) 0.7 Vp-p/75 Ohms Component Video (Pb/Pr) Tuner Section Tuning Frequency Range FM 87.5 MHz-107.9 MHz AM 530 kHz-1,710 kHz FM/AM Preset Memory 40 Stations general Power Supply AC 220 V~, 60 Hz Power Consumption 850 W Standby Power Consumption 0.1 W Dimensions (W x H x D) 17 1/8 ̋ x 7 13/16 ̋ x 15 5/16 ̋ (435 x 198 x 388.5 mm) Weight 30.9 lbs. (14.0 kg) Carton Dimensions (W x H x D): 22 1/16 ̋ x 12 5/8 ̋ x 18 3/16 ̋ (560 x 320 x 462 mm) Weight 37.5 lbs. (17.0 kg)