RP2350-Tiny Carte de Développement Basée sur Raspberry Pi RP2350 Microcontrôleur, Double-Cœur & Double-Architecture, avec Connecteur FPC, Adaptation Port USB Type-C Via Carte d'adaptation

RP2350-Tiny development board based on Raspberry Pi RP2350 microcontroller, adopts dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz, Support C/C++, MicroPython 520KB of Static Random-Access Memory, and 4MB of on-board Flash memory. Onboard FPC 8--PIN connector, adapting USB Type-C port via adapter board. Castellated module allows soldering direct to carrier boards 28 × multi-function GPIO pins (20× via edge pinout, others via solder points), 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels, 12 × Programmable I/O (PIO) state machines for custom peripheral support USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip Package Content: RP2350-Tiny development board x1 (Board Only)