Tenda 8-Port Gigabit PoE Switch with RJ45 and SFP Uplink Ports (110W Total PoE Budget, VLAN, Range Up to 250m, 802.3af/at, Fanless, Plug & Play, Metal Housing) (TEG1110PF-8-120W)

【10-Port PoE Switch】This PoE+ switch features 1 SFP port, 1 uplink port, and 8 PoE ports with a total PoE budget of 110W. It supports the IEEE 802.3af/at (PoE+) standard and delivers up to 30W per PoE port, ensuring stable power and data transmission for Wi-Fi 5/6 access points and PoE cameras. 【Intelligent Power Management】The 8-port PoE switch automatically detects PoE and non-PoE devices and only supplies power to PoE-enabled equipment. When the total power consumption exceeds 110W, lower-priority ports are automatically disabled to ensure power is supplied to priority ports and prevent overloading. [VLAN Mode] In VLAN mode, ports 1 through 8 are isolated from each other but can all communicate with the uplink and SFP ports. This mode reduces broadcast traffic and limits broadcast storms. [Extend Mode] Extend mode allows ports 1 through 8 to support a transmission distance of up to 250 m, ideal for powering IP cameras or access points located more than 100 m away. (Note: In Extend mode, the throughput of ports 1 through 8 is limited to 10 Mbps.) [Plug & Play] This network switch requires no additional configuration. It is ready to use immediately upon connection, ideal for beginners or for easily extending a wired network. 【6kV Lightning Protection】Surge and lightning protection up to 6kV is built-in on the ports and power supply, ensuring stable operation even during thunderstorms. (Note: For indoor use only; a weatherproof enclosure is required for outdoor installation.) 【Versatile Applications】With two mounting holes on the back, the switch can be wall-mounted or placed on a desktop. Its metal housing provides good heat dissipation, and its fanless design ensures quiet operation, making it ideal for home, office, school, or surveillance systems.